The default bandwidth of a high-speed serial link is 1.544 or T1. What is the correct command to change
the bandwidth of the interface to 64K?
A -
Bandwidth 64
B -
Band width 64
C -
Bandwidth 64000
D -
Band width 64000
2-
Exhibit:
Router A is unable to connect to Router B, which is a Nortel router, through the network cloud. Using the
command output shown what must be configured on Router A's interface s0 to change the line protocol
from down to up?
A -
No shutdown.
B -
Encapsulation ppp.
C -
Interface serial point-to-point.
D -
Clock rate 56000.
3-
What is one benefit of using a hierarchical addressing framework?
A -
Increase availability of addresses.
B -
Decrease distance between routers.
C -
Increase router memory requirements.
D -
No need to maintain routing information.
4-
Frame relay has a feature that prevents PVCs from shutting down from lack of activity.
What is the name of this feature?
A -
DLCI
B -
BECN
C -
FECN
D -
LMI
5-
Exhibit:
Frame Relay switch maps the DLCIs between Router A to Router B to create a PVC. Which statement
below correctly identifies the reference point between the local router and the Frame Relay switch to
which it is connected?
A -
Locally significant DLCI
B -
Globally significant DLCI
C -
Locally significant LMI
D -
Globally significant LMI
6-
Novell Netware allows multiple Layer two frame structures. Cisco supports all of the frame types. Cisco
and Novell have assigned different names for the same encapsulation type. Which of the following are
correct matches of the Novell term to the equivalent Cisco IOS term for the same framing types?
A -
Ethernet_SNAP-SNAP
B -
Ethernet_II-ARPA
C -
Ethernet_802.2-LLLC
D -
Both A & B
7-
Consider Frame Relay multipoint subinterfaces. Which is a valid statement?
A -
All routers must be in the same subnet to forward routing updates and broadcasts.
B -
Multipoint is the default configuration for Frame Relay subinterfaces.
C -
An IP address is required on the physical interface of the central router.
D -
All routers are required to be fully meshed.
8-
Encapsulation is the method of passing data down the stack of the OSI model and adding headers and
trailers. Which one of the following shows the correct order of Data Encapsulation?
A -
Data, Packet, Segment, Frame.
B -
Segment, Data, Packet, Frame.
C -
Data, Segment, Packet, Frame.
D -
Packet, Data, Segment, frame.
9-
The ICMP ping used for troubleshooting a network can be used on a Cisco router in which modes?
A -
User.
B -
Privileged.
C -
Global Configuration.
D -
Both A & B
10-
The advanced editing features are turn on by default on Cisco routers. To turn off these features you
enter the command terminal no editing. With the advanced editing features turned on what is the effect
of Ctrl-Z?