You just purchased a brand new Cisco 2621 router. By default when the router boots which search
sequence does it use to locate the IOS software?
A -
Flash, TFTP server, ROM
B -
NVRAM, TFTP server, ROM
C -
ROM, Flash, TFTP server
D -
ROM, NVRAM, TFTP server
2-
You would like the router to look in NVRAM upon boot up. Which one of the following would be the
correct value for the configuration register?
A -
0x42
B -
0x2102
C -
0x001
D -
0x2101
3-
Which of the following are true about connection-oriented network servers?
A -
Less bandwidth-intensive
B -
Reliable
C -
Handshaking
D -
Both B & C
4-
You have been hired as a consultant to troubleshoot the companys network. You issue the debug ip rip
command to troubleshooting the rip network. You notice your Ethernet interface 10.1.0.0 shuts down.
Which update message is seen in your routers debug ip rip output regarding that network?
A -
Subnet 10.1.0.0, metric 0
B -
Subnet 10.1.0.0, metric 1
C -
Subnet 10.1.0.0, metric 15
D -
Subnet 10.1.0.0, metric 16
5-
You have been assigned a class C network address. Your manager has asked to you create 30 subnets
with at least 5 hosts per subnet for the different departments in your organization. What should the
subnet mask be to create 30 subnets?
A -
255.255.255.247
B -
255.255.255.248
C -
255.255.255.249
D -
255.255.255.250
6-
Your manager is concerned about security on the subnet 10.0.1.0/24 that has the accounting servers on it.
He would like to make sure users can not telnet to those accounting servers and as asked you to add a
statement to your existing access-list to prevent users from accessing those devices via telnet. Which one
of the following statements should you enter?
A -
Access-list 115 deny tcp any 10.0.1.0 0.0.0.255 eq 23
You purchased a router from an online auction and you are unable to login to privileged mode because
the router has been configured with a password. You need to perform password recovery. One of the
first steps in performing password recovery is recording the current configuration register setting from
user mode. What is the command to view the configuration register?
A -
Show register.
B -
Show flash.
C -
Show boot.
D -
Show version.
8-
What are the generic parts of a layer 3 address?
A -
An internetnetwork number and a URL .
B -
A vendor code and a serial number.
C -
A network number and host number.
D -
A broadcast number and unicast number.
9-
There are some differences between routed and routing protocols. Which of the following are examples
of those differences?
A -
A routed protocol is assigned to an interface and determines the method of packet delivery.
B -
A routing protocol determines the path of a packet through a network.
C -
A routed protocol determines the path of a packet through a network.
D -
Both A & B
10-
Which show commands can you use to identify the local DLCI number?