TestKing# show ipx interface e0
Ethernet0 is up, line protocol is up
IPX address is 6F2C.0000.0c5d.b36e, NOVELL_ETHER [up] line-up, RIPPQ:0,
SAPPQ: 0
Delay of this IPX network, in ticks is 1 throughput 0 link delay 0
IPXWAN processing not enabled on this interface.
IPX SAP update interval is 1 minute(s)
IPX type 20 propagation packet forwarding is disabled
Incoming access list is not set
Outgoing access list is not set
IPX helper access list is not set
SAP GNS processing enabled, delay 0 ms, output filter list is not set
SAP Input filter list is not set
SAP Output filter list is not set
SAP Router filter list is not set
Input filter list is not set
Output filter list is not set
Router filter list is not set
Netbios Input host access list is not set
Netbios Input bytes access list is not set
Netbios Output host access list is not set
Netbios Outpus bytes access list is not set
Updates each 60 seconds, aging multiple RIP: 3 SAP: 3
SAP interpacket delay is 55 ms, maximum size is 480 bytes
RIP interpacket delay is 55 ms, maximum size is 432 bytes
IPX accounting is disabled
IPX fast switching is configured (enabled)
RIP packets received 0, RIP packets sent 1
SAP packets received 0, SAP packets sent 1
Novell IPX addressing uses a two-part address that consists of 32 bits for the network number and 48 bits for the node number. What is the node number/layer 2 address as shown in the output of the show ipx interface e0 command?
A -
6F2C
B -
5d.b35e
C -
0000.0c5d.b363
D -
0c5d.b363
2-
Using the following address and subnet mask 195.106.14.0/24 what is the total number of networks and
the total number of host per network?
A -
1 network with 254 hosts.
B -
2 networks with 128 hosts.
C -
4 networks with 64 hosts.
D -
6 networks with 30 hosts.
3-
Which wide area network technology was designed to work with traditional POTS lines and provide
SOHO’s and users with a higher speed digital dial-up service?
A -
Frame relay
B -
X.25
C -
ATM
D -
ISDN
4-
One of the best ways to understand how to build a network is to understand the method in which traffic
is passed across the network. One of the reasons the OSI model was created to help you understand how
a network operates. Which three devices operate at all seven layers of the OSI model?
A -
Network host
B -
Network management station
C -
Web server
D -
All of the above
5-
Which of the following are functions that occur at the transport layer of the OSI model?
A -
No acknowledgement-UDP
B -
Connection oriented-TCP/IP
C -
Three way handshake TCP/IP
D -
All of the above
6-
Which wide are network technology was designed to use high-performance digital lines and is packet
switched?
A -
ATM
B -
Frame Relay
C -
ISDN
D -
FDDI
7-
IP addresses use hierarchical numbering. What portion of the address that will identify the network
number?
A -
Subnet Mask.
B -
Dots between octets.
C -
Class of first octet.
D -
Assignments of DHCP.
8-
Looking at this address 255.255.255.255 which one of the following is true?
A -
IP, a flooded broadcast.
B -
IP, a directed broadcast.
C -
IPX, a flooded broadcast.
D -
IPX, a remote directed broadcast.
9-
Using a protocol analyzer you determine your LAN traffic is experiencing congestion. What could be
some possible causes for a congested network?
A -
Broadcast storms.
B -
Multicasting.
C -
Too many hosts in a broadcast domain.
D -
All of the above
10-
RouterA is directly connected to RouterB. On RouterA you shutdown the interface that is going to
RouterB (you put it administratively down). If you issue the command show interface on RouterB
what output status would you see on the interface that is connected to RouterA?
