The ip subnet zero command is not configured on a router. What would be the IP address of
Ethernet 0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29?
A -
192.168.8.25
B -
192.168.8.41
C -
192.168.8.49
D -
192.168.8.113
2-
For the network 192.0.2.0/23, which option is a valid IP address that can be assigned to a host?
A -
192.0.2.0
B -
192.0.2.255
C -
192.0.3.255
D -
192.0.4.0
3-
How many addresses for hosts will the network 124.12.4.0/22 provide?
A -
1022
B -
510
C -
1024
D -
2048
4-
Where does routing occur within the DoD TCP/IP reference model?
A -
application
B -
internet
C -
network
D -
transport
5-
Which VTP mode is capable of creating only local VLANs and does not synchronize with other
switches in the VTP domain?
A -
client
B -
dynamic
C -
server
D -
transparent
6-
Which switch would STP choose to become the root bridge in the selection process?
A -
32768: 11-22-33-44-55-66
B -
32768: 22-33-44-55-66-77
C -
32769:11-22-33-44-55-65
D -
32769: 22-33-44-55-66-78
7-
A switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as
full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?
A -
The additions will create more collisions domains.
B -
An additional broadcast domain will be created.
C -
More bandwidth will be required than was needed previously.
D -
IP address utilization will be more efficient.
8-
VLAN is a most useful technology, which is often used in different network environments. It is
important for you to have a real understanding of the changes brought by VLAN. Refer to the
following statements about VLAN, which are correct?
A -
VLANs simplify switch administration.
B -
VLANs allow logical grouping of users by function.
C -
VLANs enhance network security.
D -
Both B & C
9-
Refer to the exhibit. Hosts on the same VLAN can communicate with each other but are unable to
communicate with hosts on different VLANs. What is needed to allow communication between VLANs?
A -
a router with an IP address on the physical interface that is connected to the switch
B -
a router with subinterfaces configured on the physical interface that is connected to the switch
C -
a switch with an access link that is configured between the switches
D -
a switch with a trunk link that is configured between the switches
10-
When a DHCP server is configured, which one IP addresses should never be assignable to hosts?