Tìm kiếm:
TRANG NHÀ
Giới thiệu VNEDU.ORG
Điều khoản và bản quyền
Liên lạc VNEDU
TRẮC NGHIỆM TRỰC TUYẾN
---Công Cụ:---
Soạn Biểu thức
Bảng màu HTML
Ký hiệu đặc biệt 01
Ký hiệu đặc biệt 02
Ký hiệu đặc biệt 03
Ký hiệu đặc biệt 04
Ký hiệu đặc biệt 05
Ký hiệu đặc biệt 06
Ký hiệu đặc biệt 07
Ký hiệu đặc biệt [Toán]
Tin Học   ||  Căn Bản    Văn Phòng    Hệ Thống - Mạng    Phần Mềm Ứng Dụng    Kỹ thuật số    Lập trình    SQL  

CCNA Exam 640-607 - Test 19
Ngày làm bài: Hôm nay lúc 11:22:20 (Server time)
Số câu hỏi: 10.   Tổng điểm: 10
Yêu cầu hoàn thành: 60 phút.
Thời gian còn lại: 
Cỡ chữ câu hỏi:  Cỡ chữ đáp án:


1-
Which three commands are used to configure information into RAM on a router.
  A - 
Configure memory.
  B - 
Configure terminal.
  C - 
Copy startup-Config running-Config.
  D - 
All of the above.
2-
How do you get help on a command after you have received "% INCOMPLETE COMMAND" response from a switch CLI?
  A - 
Type "help" followed by the command to see the command parameter.
  B - 
Re enter the command followed by question mark to view key words.
  C - 
Enter a question mark to display all console commands.
  D - 
Type "history" to review the prompt before the error.
3-
Which command assigns the login password Cisco on the console terminal line?
  A - 
Line console
Login
Password Cisco
  B - 
Line login terminal
Password Cisco
  C - 
Line console 0
Login
Password CISCO
  D - 
Line console 0
Login
Password Cisco
4-
You just entered the following command
routers(config) #line console 0
Which operation is most likely to follow?
  A - 
Configure terminal type.
  B - 
Enter protocol parameters for a serial line.
  C - 
Create a password on the console terminal line.
  D - 
Establish a terminal type 4 connection to a remote host.
5-
Which information must a router have in order to perform proper and efficient routing?
  A - 
Destination application of an incoming packet.
  B - 
Number of other packets in a single flow of data.
  C - 
Destination network address of an incoming packet.
  D - 
Number of routers that know a path to the destination.
6-
Which symbol in the router prompt indicates you are in the privileged mode?
  A - 
#
  B - 
!
  C - 
>
  D - 
:
7-
Which statement about half-duplex Ethernet operation is true?
  A - 
With half duplex transmission frames feed into a single cable in one direction at a time.
  B - 
Half duplex transmission between stations is achieved by using point-to-point Ethernet and fast Ethernet connection.
  C - 
Half duplex transmission between stations is achieved by using point to multi point Ethernet and fast Ethernet connection.
  D - 
Half duplex Ethernet technology provides a transmit circuit connection wired directly to the receiver circuit at the other end of the connection
8-
What are true four ways that fast Ethernet that compares to 10baseT Ethernet
  A - 
Fast Ethernet is based on an extension to the IEE 802.3 specifications.
  B - 
Fast Ethernet uses the same media access control MAC mechanism.
  C - 
Fast Ethernet preserves the frame format that is used by the 10BaseT Ethernet.
  D - 
All of them
9-
What is back off on an 802.3 network?
  A - 
It is latency stored and forward switching.
  B - 
It is the time used to token passing from machine to machine.
  C - 
It is re transmission delay that is encountered when a collision occurs.
  D - 
It the result of two nodes transmitting at the same time the frames from each transmitting device collide and are damaged.
10-
Which are two steps are required to configure and apply standard access list on an interface?
  A - 
Define and access list number and its parameter.
  B - 
Enable an interface to become part of the access list group.
  C - 
Define the number of access list to be supported on an interface.
  D - 
Both A & B
 
[Người đăng: Thành Lãm - ST]
Ghé thăm Kênh của Vị Sư "hai lần chết đi sống lại"
Tu Si Chau Soc Thon

https://www.youtube.com/channel/UCoyC9WTTVR-M3qpTKKEXGnQ

Chau Soc Thon Official Channel


Phong Bảo Official
Phong Bao Official
Xem Nhiều nhất
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 11
Trắc Nghiệm Mạng Máy Tính - Bài 25
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 10
Trắc Nghiệm Hệ Thống Thông Tin Quản Lý - Bài 04
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 01
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 15
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 29
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 07
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 27
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 20
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 13
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 12
Trắc nghiệm Quản Trị Mạng - Bài 07
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 14
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 09
Trắc Nghiệm Hệ Thống Thông Tin Quản Lý - Bài 01
Trắc Nghiệm Bảo Trì Hệ Thống - Bài 01
Trắc Nghiệm Mạng Máy Tính - Bài 39
Trắc nghiệm Phân Tích Thiết Kế Hệ Thống - Bài 03
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 02
Đề Xuất
CCNA Exam 640-607 - Test 30
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 23
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 02
Microsoft Exchange Server 2010 - Test 81
CCNA Exam 640 - 802 - Test 43
CCNA Exam 640 - 802 - Test 30
Trắc nghiệm Windows Server 2008 - Bài 23
CCNA Exam 640-607 - Test 19
CCNA Exam 640 - 802 - Test 29
CCNA Exam 640-607 - Test 36
CCNA Exam 640-607 - Test 06
Trắc Nghiệm Thông Tin Di Động - Bài 24
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 97
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 67
Trắc Nghiệm Thông Tin Di Động - Bài 10
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 18
Trắc Nghiệm Bảo Trì Hệ Thống - Bài 08
Microsoft Exchange Server 2010 - Test 94
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 65
Trắc Nghiệm An Toàn Bảo Mật Thông Tin - Bài 28
Phát triển hệ thống: TRƯƠNG HỮU ĐỨC - Phiên bản 3.0 - © Copyright 2013 - 2024 - VNEDU.ORG

free counters